2200 SERIES CONVEYORS: Accessories
Adjustable Lane Guiding |
|
|
Specifications
- UHMW guide surface on an anodized
aluminum mounting rail.
- Painted Steel mounting hardware.
- Available in standard 1’ (305mm) increments
or can be ordered to any length.
- 5” (127mm) maximum, 0.25” (7mm)
minimum part height.
- 0.25” (6mm) minimum lane width.
- Package includes (1) lane guide, mounting
hardware and adjusting knobs.
- For conveyors up to 24” (610mm) wide.
Consult factory for wider lane guide availability.
- Metric fasteners only.
Important: Exceeding 5” (127) product height
will produce a pinch point.
|
 Features/ Benefits
- Compatible with standard Dorner
bolt-on profiles.
- Easily adjusts for quick product
change over.
- Attach additional guides to create
multiple lanes.
- Create lanes, plows, merges,
and transfers.
|
Pulley Transfer Plate |
|
Specifications
- 0.88” (22mm) Diameter minimum product transfer for 2200 Series
- Hard coat anodized finish
- Package includes extruded aluminum transfer plate, required
pulley tail plates and mounting hardware.
- Metric fasteners only.
|
|
* Not compatible with Gang Drive
* Not compatible with clipper splice or high friction belts
|
90° Adjustable Transfer |
 |
Specifications
- For conveyors up to 12” (305mm) wide.
- Requires low side conveyors.
- 0.25” (6mm) minimum part thickness.
- Hard coat anodized transfer plate.
- Painted Steel mounting hardware.
- 48” (1,219mm) long UHMW outside turn guide, customer can trim to fit.
- Maximum recommended part weight is 20 lbs. (9Kg) at 50 ft/min. (15 M/min.) belt speed. Consult factory regarding applications for
higher product weights or faster belt speeds.
- 0.88” (22mm) minimum product size for 2200 Series
- Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate.
Features/ Benefits:
- Pre-engineered guided turns adjust to a
variety of products.
- Accepts standard Dorner bolt-on profiles
outside of transfer area.
- Place adjusting rods where required.
- Easily adjusts for quick product change-over.
- Metric fasteners only.
|
Note: Due to the wide variety of drive setups and applications point of installation guarding is the responsibility of the end user.
Important: Do not use with 03, 08, 55, 62, or 64 High Friction Belts on Infeed conveyor |
|
Hardware Accessories |
Spring T-nut |
 |
• Mounts in T-slots to attach light weight accessories.
• Recommended for vertical aluminum stand T-slots. |
| Part Number |
Description |
200124
200124M
200300
200300M |
Spring T-nut, .25-20
Spring T-nut, M6-1.0
Package of (5) Spring T-nuts, .25-20
Package of (5) Spring T-nuts, M6-1.0 |
|
T-Slot Extenders |
 |
• Provides additional T-slots to the
end of conveyor.
• Includes mounting brackets
and hardware.
• Metric fasteners. |
| Part Number |
Description |
| 307000M |
T-Slot Extender, Pair |
|
2200 Series T-Bars |
 |
• Mounts in T-slots to attach heavy accessories.
• 2.63” (67) long 2 hole model, .75” (19) 1 hole model. |
| Part Number |
Description |
639971
639971M
300150
300150M |
1 hole T-bar, .25-20
1 hole T-bar, M6-1.0
2 hole T-bar, .25-20
2 hole T-bar, M6-1.0 |
|
T-Slot Cover |
 |
• Snaps into conveyor and
aluminum stand T-slots.
• Black plastic extrusion.
• Can be trimmed to fit. |
| Part Number |
Description |
| 645656P |
T-Slot Cover,
Per 1’ (305) of length |
|
Bottom Wiper |
 |
• Locate at discharge end of conveyor
• .25” (6) thick steel
• Removes debris from belt
• Includes metric set screws. |
| Part Number |
Description |
| 2225WWM |
2200 Series Bottom Wiper |
|
WW = Conveyor Width Reference
Note: Bottom wiper standard on 2200 Gang Drive Conveyor |
Side Guides |
 |
Specifications
- Provides a 6” or 12” wide working surface
- Adjusts in/out and up/down (.25” max above bedplate)
for product transfer on/off conveyor belts
- Can be positioned anywhere along the conveyor
- Anodized aluminum work surface
- Max load: 5 lbs./Ft (6 Kg/M), use Adjustable Tie Brackets for added capacity
- Available in 1’ (305) increments from 1’ (305) to 99’ (30,175)
- Compatible with 2200, 3200 and 5200 Series Conveyors
|
 |
|
Side Guides |
Flared Side Guide |
 |
• Guides parts onto conveyor belt surface.
• Includes metric mounting hardware. |
| Part Number |
Description |
280802M
280803M
280804M
280805M
280806M |
2’ (610) Flared Side
3’ (914) Flared Side
4’ (1219) Flared Side
5’ (1524) Flared Side
6’ (1829) Flared Side |
|
Stops |
Adjustable Stop |
 |
• Slides up and down T-slot length.
• Includes metric mounting hardware |
| Part Number |
Description |
| 3076WWM |
Adjustable Stop |
|
WW = Conveyor Width Reference |
End Stop |
 |
• Anodized aluminum stop
• Includes tail plates & mounting hardware
No Gang Drive Option |
| Part Number |
Description |
| 2255WWM |
End Stop, metric fasteners |
|
Roller Conveyor End Stop |
 |
• Includes metric mounting hardware |
| Part Number |
Description |
| 2086WWM |
Roller End Stop |
|
Brackets |
Adjustable Height Bracket ‡ |
 |
• Provides height adjustment
• (2) Height Ranges
• Includes mounting hardware
• Compatible with 2200 series |
| Part Number |
Description |
A |
B |
C |
D |
E |
| 201557 |
2" x 3" Bracket |
2 (51) |
3 (76) |
1.4 (36) |
2.4 (61) |
1.9 (48) to 3.4 (86) |
| 201558 |
3" x 5" Bracket |
3 (76) |
5 (127) |
2 (51) |
3.4 (86) |
3.3 (84) to (5.3 (135) |
|
Table Top Mounting Bracket ‡ |
 |
• Includes metric mounting hardware |
| Part Number |
Description |
| 200349M |
Table top bracket |
|
‡ = If the discharge end of conveyor is mounted over a table or similar structure, the customer must provide guiding to prevent against possible pinch point. |
Frame Mount Casters |
 |
• Includes metric mounting hardware |
| Part Number |
Description |
| 390207 |
Frame mount casters, pair. |
|
|
Floor Mount Brackets |
 |
• Includes metric mounting hardware |
| Part Number |
Description |
| 390217 |
Floor mount brackets, pair. |
|
|
Drive Shaft Accessories |
Support Block |
 |
• For 2200 Series Gang Drive Conveyors |
| Part Number |
Description |
| 23-33M |
Support Block,
.38 Hex Shaft |
|
Clear Cover |
• Fits 2200 light load top mount &
standard & heavy load top and bottom
mount packages |
| Part Number |
Description |
| 689499M |
Clear cover,
ordered separately |
|
Solid Coupling, Hex to Hex |
 |
• Includes metric set screws |
| Part Number |
Description |
| 210064M |
Solid Coupling, .38 Hex to Hex |
|
Hex Shaft |
 |
• Includes metric mounting hardware |
| Part Number |
Description |
| 23-24 |
.38” Hex Shaft, steel,
48” (1,219) long |
| 631418 |
.38” Hex Shaft, stainless
steel, 72” (1,829) long |
|
Flexible Coupling |
• (A) Includes SAE set screws, (B) metric set screws. |
| Part Number |
Description |
Coupling |
23M29
23M31 |
Flexible Coupling, 12mm bore x .38” hex
Flexible Coupling, 12mm bore x 12mm bore |
B
B |
|
|
Service Accessories |
Tool Kit |
 |
| Part Number |
Description |
2200M
2500M |
Tool Kit, 2200 Series, Metric
Tool Kit, 2200 Series, Gang Drive |
|
|
Due to the wide variety of possible conveyor setups, adaption of the supplied guarding material is the responsibility of the end user.
Contact Form 
2300 Series 
