3200 SERIES HEAVY DUTY BELT CONVEYOR: Cleated Belt End Drive

Loads up to 400 lbs* (181 kg)
Belt speeds up to 600 ft/min (183 m/min)
Belt widths: 3.75” (95 mm) to 24” (610 mm)
Conveyor lengths: 3’ (914 mm) to 40’ (12,192 mm)
Cleats available from 0.24” (6 mm) to 2.36” (60 mm) high
2” (51 mm) minimum cleat spacing
1.62” (41 mm) of belt take-up on conveyors up to 20’ long
3.24” (82 mm) of belt take-up on conveyors over 20’ long
3” (76 mm) diameter drive pulley turns
approximately 9.7” (246 mm) of belt per revolution
models available

* Conveyor load capacity depends on conveyor size, incline,
motor position, accumulated loads and other factors.

Quick five-minute belt change
Rack and pinion belt tensioning for fast,
accurate single point belt tensioning
V-groove bed plate with guided belt provides positive belt
tracking, even under demanding side load applications
V-guided belts eliminate belt tracking
Strong, box-like construction resists damaging frame twist
Stand mounting brackets and return belt rollers are
easily re-positioned along the frame
Special length conveyors in 0.12” (3 mm) increments
at standard price and delivery
Two T-Slots on each side for easy mounting of
pre-engineered accessories

Optional: Sidewall Cleated Belt

Used for small part handling.
Available in 6” (152 mm) and
wider belt widths.

Standard Feature: Rack and Pinion

Allows the tail section to be easily
slid back for quick belt removal.

cleated belt end drive heavy duty belt conveyor diagram

Note: Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations

Notes:

Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
Dimensions are represented in inches, feet, and (millimeters).
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.