3200 SERIES HEAVY DUTY BELT CONVEYOR: Flat Belt Center Drive

Printer-Friendly Documents

Specifications:

Loads up to 1,000 lbs* (455 kg)
Belt Speeds up to 600 ft/min (183 m/min)
Belt widths: 3.75” (95 mm) to 48” (1,219 mm)
Conveyor lengths: 4’ (1,219 mm) to 99’ (30,175 mm)
16” (406 mm) of belt take-up
6” (152 mm) diameter drive pulley turns
approximately 18.8” (479 mm) of belt per revolution
models available

* Conveyor load capacity depends on conveyor size, incline,
motor position, accumulated loads and other factors.

Features/Benefits:

Quick five-minute belt change
Center Drive Module frees up both ends of conveyor
for operator and machine interface
The Center Drive Module can be easily repositioned
along the length of the conveyor
Maintenance free pneumatic belt tensioner maintains
uniform belt tension (Manual spring tension available)
V-groove bedplate with guided belt provides positive
belt tracking, even under demanding side load applications
Non V-guided belts use our patented belt tracking cams,
offering you the widest belt selection possible
Strong, box-like construction resists damaging frame twists
16” of belt take-up extends conveyor belt life
Stand mounting brackets and return belt rollers are
easily re-positioned along the frame
Special length conveyors in 0.12” (3 mm) increments
at standard price and delivery
Two T-Slots on each side for easy mounting of
pre-engineered accessories

Optional: Nose Bar Tail for heavy duty belt conveyor

Includes sealed bearings,
1” (25 mm) diameter rollers and
is available at both ends for
small part transfers.

flat belt center drive for heavy duty belt conveyor

STANDARD SIZES
Conveyor Width Reference	04	06	02 increments up to...	48
Conveyor Belt Width (W)	3.75” (95)	6” (152)	2” (51) increments up to...	48” (1,219)
Conveyor Length Reference	0400		0001 increments up to...	9900
Conveyor Length (L)	4’ (1,219)		.12” (3) increments up to...	99’ (30,175)

Note: Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations.
Note: Conveyors wider than 40” (1,016) require V-Guide belt tracking.

Notes:

Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
Dimensions are represented in inches, feet, and (millimeters).
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.