3200 SERIES HEAVY DUTY BELT CONVEYOR: Flat Belt End Drive

Printer-Friendly Documents

Specifications:

Loads up to 400 lbs* (181 kg)
Belt speeds up to 600 ft/min (183 m/min)
Belt widths: 3.75” (95 mm) to 48” (1,219 mm)
Conveyor lengths: 3’ (914 mm) to 40’ (12,192 mm)
1.62” (41 mm) of belt take-up on conveyors up tor 20’ long
3.24” (82 mm) of belt take-up on conveyors over 20’ long
3” (76mm) diameter drive pulley turns
approximately 9.7” (246 mm) of belt per revolution
models available

* Conveyor load capacity depends on conveyor size, incline,
motor position, accumulated loads and other factors.

Features/Benefits:

Quick five-minute belt change
Rack and pinion belt tensioning for fast, accurate single
point belt tensioning
V-groove bed plate with guided belt provides positive
belt tracking, even under demanding side load applications
Belt take-up indicator allows for quick reading of
remaining belt life
Strong, box-like construction resists damaging frame twist
Stand mounting brackets and return belt rollers are
easily re-positioned along the frame
Two T-Slots on each side for easy mounting of
pre-engineered accessories

Optional: Nose Bar Tail

Includes sealed bearings, 1” (25 mm)
diameter rollers and is available at
both ends for small part transfers.

Standard Feature: Rack and Pinion

Allows the tail section to be easily
slid back for quick belt removal.

3200 series heavy duty belt conveyor flat belt end drive diagram

STANDARD SIZES
Conveyor Width Reference	04	06	02 increments up to...	48
Conveyor Belt Width (W)	3.75” (95)	6” (152)	2” (51) increments up to...	48” (1,219)
Conveyor Length Reference	0300		0001 increments up to...	4000
Conveyor Length (L)	3’ (914)		.12” (3) increments up to....	40’ (12,192)

Note: Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations.
Note: Conveyors wider than 40” (1,016) require V-Guide belt tracking.

Notes:

Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
Dimensions are represented in inches, feet, and (millimeters).
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.