Home About Dorner Contact Us Distributors TradeshowsSite Map
Dorner Advantage

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

5200 SERIES CONVEYORS: Belting


Dorner’s Standard Modular Plastic Belt offers
these valuable advantages:

  

Friction Inserts
are available for incline applications. Inserts may be placed along entire length of the belt or spaced on 2”, 4”, 6” or 12” centers. Friction inserts are indented 2”(51 mm) from each belt edge.

  

Flat Top Belts
provide a very closed surface for
complete product support, easy wiping.

 

  

 

 

Flush Grid Belts
provide an open surface for better
drainage, cleaning or air flow/cooling.

  

Curve Belts
provide a tight radius, space saving corner.
Side tabs ensure positive belt tracking with a
flush top design. Reduces number of drives.

 

  

 

 

 

Cleated Belts
provide a sturdy cleat for elevation at steep
inclines. Cleats available in 1” and 3” heights.

  

 

 

Standard Plastic Chain Options
MN Flat top 0 1 (25) 0.43 (11) White Acetal Polyethylene -40 (-40) 215 (102) Y Good V-Good 5 N/A
MP Flat top 0 1 (25) 0.43 (11) White Polypropylene Polyethylene 40 (5) 275 (135) Y V-Good Good 5 N/A
MC Flush Grid 35 1 (25) 0.39 (10) White Acetal Polyethylene -40 (-40) 215 (102) Y Good V-Good 5 N/A
MD Flush Grid 35 1 (25) 0.39 (10) White Polypropylene Polyethylene 40 (5) 275 (135) Y V-Good Good 5 N/A
MG Flat top 0 0.5 (13) 0.39 (10) White Acetal Polyethylene -40 (-40) 215 (102) Y Good V-Good 5 1 (25)
MH Flat top 0 0.5 (13) 0.39 (10) White Polypropylene Polyethylene 40 (5) 275 (135) Y V-Good Good 5 1 (25)
MJ Flush Grid 25 0.5 (13) 0.39 (10) White Acetal Polyethylene -40 (-40) 215 (102) Y Good V-Good 5 1 (25)
MK Flush Grid 25 0.5 (13) 0.39 (10) White Polypropylene Polyethylene 40 (5) 275 (135) Y V-Good Good 5 1 (25)
NJ Flat top w/
1” Cleats		 0 1 (25) 0.43 (11) White Acetal Polyethylene -40 (-40) 215 (102) Y Good V-Good 60˚ N/A
NK Flat top w/
1” Cleats		 0 1 (25) 0.43 (11) White Polypropylene Polyethylene 40 (5) 275 (135) Y V-Good Good 60˚ N/A
NL Flat top w/
3” Cleats		 0 1 (25) 0.43 (11) White Acetal Polyethylene -40 (-40) 215 (102) Y Good V-Good 60˚ N/A
NM Flat top w/
3” Cleats		 0 1 (25) 0.43 (11) White Polypropylene Polyethylene 40 (5) 275 (135) Y V-Good Good 60˚ N/A
NE Flush Grid
w/ 1” cleats		 35 1 (25) 0.39 (10) White Acetal Polyethylene -40 (-40) 215 (102) Y Good V-Good 60˚ N/A
NF Flush Grid
w/ 1” cleats		 35 1 (25) 0.39 (10) White Polypropylene Polyethylene 40 (5) 275 (135) Y V-Good Good 60˚ N/A
NG Flush Grid
w/ 3” cleats		 35 1 (25) 0.39 (10) White Acetal Polyethylene -40 (-40) 215 (102) Y Good V-Good 60˚ N/A
NH Flush Grid
w/ 3” cleats		 35 1 (25) 0.39 (10) White Polypropylene Polyethylene 40 (5) 275 (135) Y V-Good Good 60˚ N/A
SEE
TABLE
BELOW		 Flat top
w/ friction
inserts		 0 1 (25) 0.55 (14) White Polypropylene Polypropylene 40 (5) 140 (60) Y V-Good Poor 20 1 (25)
SEE
TABLE
BELOW		 Flush Grid
w/ friction
inserts		 35 1 (25) 0.55 (14) White Polypropylene Polypropylene 40 (5) 140 (60) Y V-Good Poor 20 1 (25)
MT Tight
Radius		 35 1 (25) 0.5 (13) White Acetal Nylon -40 (-40) 215 (102) Y Good V-Good N/A 1.6 (41)

*FDA = Food and Drug Administration, CFIA = Canadian Food Inspection Agency
** Temperature, environmental conditions, product materials and product configuration effect the maximum incline or decline. Product testing is recommended.
*** These do not indicate ambient running conditions. Ambient temperature range is 30 to 100 F ( -1 to 38 C).
Product temperature is dependent on length of time product is in direct contact with belt surface. Product testing is recommended.

FRICTION TOP STRAIGHT PLASTIC CHAIN: Part number reference chart
Flat Top w/ Friction Inserts Part Number Reference TA TB TC TD TE
Flush Grid w/ Friction Inserts Part Number Reference N/A TF TG TH TJ
Friction Insert Spacing [links] 1 2 4 6 12
Friction Insert Spacing [in(mm)] 1” (25) 2” (51) 4” (102) 6” (152mm) 12” (305)

Note: Friction Top not available on nose bar drives

 

Back to top