Home > Standard Products > 5200 Series > Cleated Belt End Drive

Specifications:

• Loads up to 1000 lbs. (455 kg)
• Belt speeds up to 280 ft/min (80 m/min)
• Belt widths: 8'' (203 mm) - 24" (610 mm) in 2" increments
• Conveyor lengths: 3' (914 mm) - 999" (25,375 mm) in 1" increments
• UHMW wear strips
• 4.3" diameter drive and idler pulleys
• T-slots for mounting accessories
  • Rigid, 5.8" high, anodized aluminum frame
• Available in 1" and 3" high cleats
• Includes anodized aluminum side guides (not shown)
  

Features and Benefits:

• QWIK slots make mounting air and electrical lines simple with no drilling, special tools, or t-nuts required
• Completely contained belt eliminates catenary sag and reduces pinch points
• Designed-in low voltage wireway provides support and protection for low voltage wires running from the electronic
  device to the main junction or control box
• No holes in side rails makes reconfiguration quick and easy
• Open top frame simplifies belt maintenance and replacement
• Sprocket alignment key provides continuous sprocket alignment for quick belt assembly
• Support stands mount directly to bottom of side rail which keeps frame open for mounting accessories

UHMW Belt Tracking Guides	Support Stands Mount Directly to Bottom of Frame

Standard Sizes
Conveyor Width Reference	08	02 increments up to...	24
Conveyor Length Reference	036	0001 increments up to...	999
Conveyor Length (L)	36” (914mm)	1” (25mm) increments up to...	999” (25,375mm)

 

Belt Width Table
Conveyor Width (inch)	Belt Width	Outside Frame Width	Cleat Width	Pocket Width
08	7.89	8.53	5.29	5.53
10	9.85	10.50	7.25	7.50
12	11.84	12.48	9.24	9.48
14	13.79	14.45	11.19	11.45
16	15.76	16.43	13.16	13.43
18	17.73	18.40	15.13	15.40
20	19.70	20.38	17.10	17.38
22	21.66	22.35	19.06	19.35
24	23.63	24.33	21.03	21.33

 

Notes:

• Dimensions are represented in inches, feet, and (millimeters).
• Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
• Conveyors longer than 12' (3658 mm) will be constructed using multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.

Part Reference Guide (2.90 MB PDF)