5200 Series Conveyors From Dorner Mfg. Corp.

Fixed Height Support Stands

Fixed Foot Model
Fixed Foot Model	12” (305mm)	2” (51) increments up to... 60” (1524mm)
Part # Reference	12	in 02 increments up to... 60
Stand Height (HH)*	15” – 19” (381mm-483mm)	in 1” (25) increments up to... 95” – 99” (2413mm-2515mm)
Part # Reference	1519	in 0101 increments up to... 9599

• Metric fasteners
• 4” (102 mm) Height Adjustment

* Dependent on stand width, stands over 42” (1067 mm) may include outriggers

Swivel Locking Caster Model
Stand Width (WW)	12” (305mm)	2” (51) increments up to... 48” (1524mm)
Part # Reference	12	in 02 increments up to... 48
Stand Height (HH)*	20” – 24” (508mm-610mm)	in 1” (25) increments up to... 68” – 72” (1727mm-1829mm)
Part # Reference	2024	in 0101 increments up to... 6872

Adjustable Height Support Stands

Fixed Foot Model

Stand Width (WW)

12” (305mm)

2” (51) increments up to... 60” (1524mm)

Part # Reference

in 02 increments up to... 60

Stand Height (HH)

12”-13”	13”-15”	14”-17”	16”-21”	19”-26”	24”-36”
(305-330)	(330-381)	(356-432)	(406-660)	(483-686)	(610-914)

30”-48”	42”-60”*	54”-72”*	66”-84”*	78”-96”*
(762-1219)	(1067-1524)	(1372-1829)	(1676-2134)	(1981-2438)

Part # Reference

1213

1315

1417

1621

1926

2436

3048

4260

5472

6684

7896

• Metric fasteners

* Dependent on stand width, stands over 42” (1067) tall may include outriggers

Swivel Locking Caster Model

Stand Width (WW)

12” (305mm)

2” (51) increments up to... 60” (1524mm)

Part # Reference

in 02 increments up to... 60

Stand Height (HH)

17”-18”	18”-20”	19”-22”	21”-26”	24”-31”
(432-457)	(457-508)	(483-559)	(533-660)	(610-787)

29”-41”	35”-53”	47”-65”*	59”-77”*
(737-1041)	(762-1346)	(1194-1651)	(1499-1956)

Part # Reference

1718

1820

1922

2126

2431

2941

3553

4765

5977

Single Post & Pillar Support Stands

STANDARD SIZES

Stand Width (WW)

8”	10”	12”	14”	16”	18”
(203)	(254)	(305)	(356)	(406)	(457)

Part # Reference

Stand Height (HH)

16” - 26”	24” - 34”	32” - 42”	40” - 50”	48” - 58”
(406-660)	(610-864)	(813-1067)	(1016-1270)	(1219-1473)

Part # Reference

Base Diameter (BD)

24” (610)

27” (686)

30” (762)

33” (838)

36” (915)

• Casters do not change overall height
• Metric fasteners

Short Support Stands

Fixed Foot Model
Stand Width (WW)	12” (305mm)	2” (51mm) increments up to... 60” (1524mm)
Part # Reference	12	in 02 increments up to... 60
Stand Height (HH)	06” – 08” (152-203mm)	in 1” (25) increments up to... 12” – 14” (305-356mm)
Part # Reference	0608	in 0101 increments up to... 1214

Full width top plate on 10” wide stands only

Swivel Locking Caster Model
Stand Width (WW)	12” (305mm)	2” (51mm) increments up to... 60” (1524mm)
Part # Reference	12	in 02 increments up to... 60
Stand Height (HH)	11” – 13” (279-330mm)	in 1” (25) increments up to... 17” – 19” (432-483mm)
Part # Reference	1113	in 0101 increments up to... 1719

Fully Adjustable Support Stands

Fixed Foot Model

Stand Width (WW)

8” (203mm)

2” (51mm) increments up to... 60” (1524mm)

Stand Width Reference

02 increments up to... 60

Top of Belt Range

7” - 19”	12” - 31”	12” - 43”	12” - 55”	12” - 67”
(179-483mm)	(305-787mm)	(305-1097mm)	(305-1397mm)	(305-1702mm)

Stand Height Reference

0719

1231

1243

1255

1267

• Metric fasteners

Swivel Locking Caster Model

Stand Width (WW)

8” (203mm)

2” (51mm) increments up to... 60” (1524mm)

Stand Width Reference

In 02 increments up to... 60

Top of Belt Range

12”-19”	17”-31”	17”-43”	17”-55”	17”-67”
(305-483mm)	(432-787mm)	(432-1097mm)	(432-1397mm)	(432-1702mm)

Stand Height Reference

1219

1731

1743

1755

1767

Multi Tier Stands

Minimum Tier Height Per Conveyor
Flat Belt	12” (305mm)
Cleated Belt	15” (381mm)

• Metric fasteners

Base
Stand Width (WW)	12” (305mm) (1219mm)	2” (51) increments up to... 48”
Part # Reference	12	02 ncrements up to... 48
Stand Height (HH)	12” (305mm) (1524mm)	2” (51) increments up to... 60”
Part # Reference	1212	0002 increments up to... 1260

Tier
Stand Width (WW)	12” (305mm) (1219mm)	2” (51) increments up to... 48”
Part # Reference	12	02 ncrements up to... 48
Note: Do not use with support stands equipped with casters. Support Stands must be anchored to the floor. Do not use if conveyed product overhangs the edge of the conveyor belt due to pinch point created.

Tall Support Stands

Tall Stands are the Fixed Height and Adjustable Height Stands as shown with additional outrigger support for added stability. These outriggers are required when the height of the stand exceeds 3.5x its width, and they add 16” to stand width. Tall stands over 6’ tall include diagonal bracing.

Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user.

Fine Adjustment Kit

• Provides fine height adjustment via a threaded bolt
• For use with Fixed Height Stands

Stand Accessories

Adjustable Tie Bracket

Compatible with steel and aluminum support stands
Secure critical stand and conveyor locations
Length (L) adjusts + 0”, - 11.25” (286 mm)
Includes metric mounting hardware

Part Number	Description
27M400-02 27M400-03 27M400-04 27M400-05 27M400-06	Adjustable Tie Bracket, 2’ (610mm) Adjustable Tie Bracket, 3’ (914mm) Adjustable Tie Bracket, 4’ (1,219mm) Adjustable Tie Bracket, 5’ (1,524mm) Adjustable Tie Bracket, 6’ (1,829mm)

Diagonal Bracing

For use on steel, aluminum and single post support stands with casters
Metric fastener mounting hardware included
For use on all stands with casters and any stands over 72” (1829mm) tall
One brace per stand for conveyors up to 24” wide (610mm)
Two braces per stand for conveyors over 24” wide (610mm)

Part Number	Description
710046 710047 710247	for two-legged H style stands up to 30” tall (762mm) for two-legged H style stands over 30” tall (762mm) for Single Post and Pillar stands over 30” tall (762mm)

Common Mount Kit

• Stand accessory for mounting multiple conveyors in parallel to one stand

5200 SERIES CONVEYORS: Support Stands