Home About Dorner Contact Us Distributors TradeshowsSite Map
Dorner Advantage

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

Home > Standard Products > 7300 Series > Flat Belt End Drive

7300 SERIES CONVEYORS: Flat Belt End Drive



Specifications:

  • Loads up to 60 lbs (27 kg)
  • Belt speeds up to 264 ft/min (81 m/min)
  • Belt widths: 1.75” (44 mm) to 18” (457 mm)
  • Conveyor lengths: 2’ (610 mm) to 18’ (5,486 mm)
  • 11 gauge stainless steel roll formed frame
  • Complete stainless steel construction
  • 1.25” (32 mm) diameter drive pulley turns approximately 4.25” (108 mm) of belt per revolution
  • 1.5” (38 mm) bottom of frame to top of belt
  • Self-aligning stainless steel sealed bearings with FDA approved solid lubricant
  • Washdown rated gearmotors and controls
  • models available

Features/Benefits:

  • Quick five-minute belt change for increased uptime
  • Rack and pinion for fast single point belt tensioning
  • 304 stainless steel frame, head and tail plates are polished to a #4 finish
  • V-Groove frame with guided belt ensures accurate tracking
  • Wedge-Lok™ system for impact protection
  • Streamlined design fits where other conveyors do not
  • Low profile, single piece frame for quick, easy cleaning
  • Quick-clamp rail for easy mounting of bolt-on accessories
  • Optional 0.25” (6 mm) thick bottom wiper
  • A variety of FDA approved belting to meet application needs

 

7300 Rated for High Pressure

Chlorinated Cleaners


 

Optional: Bottom Wiper Optional: Tool-less Belt Change Handles

 

Tool-less Belt Change Handles for quick belt release. Part # 456060






STANDARD SIZES
Conveyor Width Reference 02 03 04 05 06 08 10 12 18
Conveyor Belt Width (W) 1.75”
(44)		 2.75”
(70)		 3.75”
(95)		 5”
(127)		 6”
(152)		 8”
(203)		 10”
(254)		 12”
(305)		 18”
(457)
Conveyor Length Reference 0200 0001 increments up to... 1800
Conveyor Length (L) 2’ (610) .12” (3) increments up to... 18’ (5,486)
Note: Lengths 13’ to 18’ available in widths 6” to 18” only.

Notes:

  • Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
  • Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
  • Dimensions are represented in inches, feet, and (millimeters).
  • Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.

 

Back to top