Home About Dorner Distributors TradeshowsSite Map
Dorner Advantage Newsletter

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

Home > Standard Products > 7350 Series > Curved Modular Flat Belt

7350 SERIES CONVEYORS: Curved Modular Flat Belt



Specifications:

  • Loads up to 500 lbs (453 kg)
  • Belt speeds up to 260 ft/min maximum (78.6 m/min)
  • Belt widths: 4” (102 mm) to 36” (914 mm)
  • Total lengths up to 83’ (25,298 mm)
  • 45°, 90°, 135°, & 180° curves available
  • Wearstrip material is UHMW
  • One revolution of the drive pulley moves the belt approximately 12”
  • TIG welded 304 Stainless Steel Frame
  • Hard Chrome Coated Bearing with FDA H1 Food Grade Grease
  • FDA approved belting and plastic components
  • models available

Features/Benefits:

  • Frame is constructed of TIG welded 304 stainless steel and features open design with minimal horizontal surfaces
  • Solid UHMW wear strips located in welded cross members for durable belt support
  • Mount controls and accessories fast with no drilling required includes adjustable guiding, photo eyes, low voltage wires, controls, and air tubing
  • Flexible guiding packages for a variety of applications including fully adjustable single and twin rail, and high side
  • The Powered Transfer (optional) has 1/2” diameter pulleys for maintaining speed through transfer
  • Roller Transfer Plate (optional) for smooth product transfer in minimal added length
  • Conveyor is suitable for wipe-down and occasional pressurized liquid spray cleaning up to 100 psi max

 

Flush Top, Low Side Frame

 

Powered Transfer Roller Transfer Plate

For small parts and maintaining speeds through transfer. Slave driven with speeds up to 260 ft/min.

For smooth product transitions in minimal added length.


Belt Width Table
Conveyor Width (in)
Top of Belt Width
Belt Width Including Tab
Inside Radius of Belt
04
4.0
4.75
4.81
06
6.0
6.75
7.38
08
7.80
8.55
10.6
10
9.81
10.56
14.1
12
11.79
12.53
17.5
14
13.75
14.50
20.8
16
15.72
16.47
24.1
18
17.69
18.44
27.4
20
19.66
20.41
30.7
22
21.63
22.38
33.9
24
23.60
24.35
37.2
26
25.55
26.29
40.5
28
27.51
28.26
43.6
30
29.48
30.23
47.0
32
31.45
32.2
50.2
34
33.42
34.17
53.6
36
35.39
36.14
56.8


STANDARD SIZES
Conveyor Width Reference 04 02 increments up to... 36
Conveyor Belt Width (W) 4" (102) 2" (51) increments up to... 36" (914)
Conveyor Length Reference 036 001 increments up to... 999
Conveyor Length (L1) Greater of 20” (508mm) or 1.5W 1" (25) increments up to... 999" (25,375)
Conveyor Length (L3) Greater of 36” (914mm) or 2W 1" (25) increments up to... 999" (25,375)
Note: Nose Bar drive conveyors have a minimum conveyor length of 48”


Notes:

  • Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
  • Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
  • Dimensions are represented in inches, feet, and (millimeters).
  • Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.

 

Back to top