Curved Modular Flat Belt Conveyor | Sanitary Conveyor | AquaPruf 7400 Series Conveyor Systems

Specifications:

Loads up to 20 lbs/square foot of belt (90 kg/m2)
Belt Widths: 8” (203 mm) to 36” (610 mm)
Total Lengths up to 999” (25,375 mm)
Belt speed: 175 ft/min maximum (53 m/min)
Degree of curves: 15° to 180°
8” and 10” widths available in 30° increments
12” through 36” widths available in 15° increments
Maximum of 2 curves per conveyor with up to 240° total degrees of turns (up to 4 curves is possible dependant upon length and degree of curves, consult factory)
Wear strip material is UHMW
Continuous TIG welded 304 stainless steel frame
#4 Polish on all outside surfaces
Bearing material is 400 stainless steel
Bearing lubricant is H1 type FDA lubricant
FDA approved belting and plastic components

Features/Benefits:

Frame is designed with no horizontal surfaces for optimum cleaning.
Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5” diameter transfer.
The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.

BISSC Certified Conveyor


1.5” (38 mm) diameter for tight transfers	For easy cleaning on wide or long conveyors	For fast and effective sanitation

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel.

Side Drive Model

Nose Bar Drive Model

Belt Radius
Conveyor Width	Standard Belt Radius	Specialty Belt Radius
8	11.1 (281)	13.6 (345)
10	14.0 (357)	17.0 (432)
12	17.3 (440)	20.4 (518)
14	20.6 (524)	23.8 (605)
16	23.9 (607)	27.2 (691)
18	27.2 (692)	30.6 (777)
20	30.5 (774)	34.0 (864)
22	33.7 (857)	37.4 (950)
24	37.0 (941)	40.8 (1,036)
26	40.4 (1,026)	N/A
28	43.5 (1,105)	N/A
30	46.9 (1,191)	N/A
32	50.0 (1,270)	N/A
34	53.5 (1,358)	N/A
36	56.6 (1,438)	N/A

STANDARD SIZES
Conveyor Width Reference	08	02 increments up to...	36
Conveyor Belt Width (W)	8” (203)	2" (51) increments up to...	36” (914)
Conveyor Length Reference	020	001 increments up to...	999
Conveyor Length (L)	20" (508)	1” (25) increments up to...	999" (25,375)

Notes:

Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors.
For support stands - see Support Stands.
Dimensions are represented in inches, feet, and (millimeters).
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.

7400 SERIES CONVEYORS: Curved Modular Flat Belt

Specifications:

Features/Benefits:

Side Drive Model

Nose Bar Drive Model

Belt Radius