7400 SERIES CONVEYORS: Modular Cleated Belt

7400 Series Modular Cleated Belt Conveyors

Specifications:

Load: 20 lbs/square foot of belt (90 kg/m2)
Belt Widths: 6” (152 mm) to 24” (610 mm)
Lengths: 36” (914 mm) to 999” (25,375 mm)
Belt speed: 233 ft/min maximum (71 m/min)
Wear strip material is UHMW
Continuous TIG welded 304 stainless steel frame
#4 Polish on all outside surfaces
Bearing material is 400 stainless steel
Bearing lubricant is H1 type FDA lubricant
FDA approved belting and plastic components

Features/Benefits:

Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10’ (3,048 mm) long consist of multiple sections which are bolted together.
Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
The tool-less tip up pulley allows conveyor end to be easily lifted without tools for convenient sanitation.
Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.


For easy cleaning on wide or long conveyors	For fast and effective sanitation

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel.

Side Drive Model

CLEAT PROFILES

STANDARD SIZES
Conveyor Width Reference	06	02 increments up to...	24
Conveyor Belt Width (W)	6” (152)	2” (51) increments up to...	24” (610)
Conveyor Length Reference	036	001 increments up to...	999
Conveyor Length (L)	36” (914)	1” (25) increments up to...	999” (25,375)

Notes:

Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors.
For support stands - see Support Stands.
Dimensions are represented in inches, feet, and (millimeters).
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.

7400 SERIES CONVEYORS: Modular Cleated Belt

Specifications:

Features/Benefits:

Side Drive Model

CLEAT PROFILES