Sanitary Conveyor - AquaPruf 7400 Series Conveyors From Dorner Mfg. Corp.

Support Stand Quantity Charts

7400 Straight Conveyors
• See table below for Stand Requirements

7400 Series Straight Conveyors
Conveyor Length	Number of Supports
20” (0.5M) - 30” (0.8M) 31” (0.8M) - 132” (3.4M) 133” (3.4M) - 252” (6.4M) 253” (6.4M) - 372” (9.4M) 373” (9.5M) - 492” (12.5M) 493” (12.5M) - 612” (15.5M) 613” (15.6M) - 732” (18.6M) 733” (18.6M) - 852” (21.6M) 853” (21.7M) - 972” (24.7M) 973” (24.7M) - 999” (25.4M)	1 2 3 4 5 6 7 8 9 10

7400 Curved Conveyors
• Straight modules must have stands near ends and at frame section junctions
• See table below for Curve Modules Stand Requirements



	8"	10"	12"	14"	16"	18"	20"	22"	24"	26"	28"	30"	32"	34"	36"
15	n/a	n/a	0	0	0	0	0	0	0	0	0	0	0	0	0
30	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0
45	n/a	n/a	0	0	0	0	0	0	0	0	0	0	0	0	0
60	0	0	0	0	0	0	0	0	0	1	1	1	1	1	1
75	n/a	n/a	1	1	1	1	1	1	1	1	1	1	1	1	1
90	0	0	1	1	1	1	1	1	1	1	1	1	1	1	1
105	n/a	n/a	1	1	1	1	1	1	1	2	2	2	2	2	2
120	1	1	1	1	1	1	1	1	1	2	2	2	2	2	2
135	n/a	n/a	2	2	2	2	2	2	2	2	2	2	2	2	2
150	1	1	3	3	3	3	3	3	3	3	3	3	3	3	3
165	n/a	n/a	3	3	3	3	3	3	3	3	3	3	3	3	3
180	1	1	3	3	3	3	3	3	3	3	3	3	3	3	3

Support Stands

Straight Conveyor
Support Stands

Horizontal Mount Version for direct conveyor mounting, conveyor must be level (Mount directly to conveyor)
Foot self-aligns 10° for sloped floors
All components are stainless steel brushed to #4 finish
Incline Mount Version for angled conveyor applications
Sanitary Support Stands do not require mounting brackets

Straight Conveyor Fixed Foot Model
Conveyor Width		6 (152)	8 (203)	10 (254)	12 (305)	14 (356)	2" (51) increments up to...	60 (1524)
WW Part# Reference		06	08	10	12	14	02 increments up to...	60
	Stand Width	15.85 (403)	17.85 (453)	19.85 (504)	21.85 (555)	23.4 (594)	2" (51) increments up to...	69.4 (1762)
	Top of Belt Height	19-23 (483-584)		1” (25) increments up to...				70-74 (1778-1880)
	HH Part# Reference	1923		0101 increments up to...				7074
	Stand Width	17.81 (452)	19.81 (503)	21.81 (554)	23.81 (605)	25.8 (655)	2" (51) increments up to...	71.8 (1823)
	Top of Belt Height	19-23 (483-584)		1” (25) increments up to...				70-74 (1778-1880)
	HH Part# Reference	1923		0101 increments up to...				7074
	Stand Width	10.25 (260)	12.25 (311)	14.25 (362)	16.25 (413)	18.25 (464)	2" (51) increments up to...	64.25 (1632)
	Top of Belt Height	13-17 (330-432)		or				16-20 (406-508)
	HH Part# Reference	1317		or				1620

Straight Conveyor Swivel Locking Casters Model*
Conveyor Width		6 (152)	8 (203)	10 (254)	12 (305)	14 (356)	2" (51) increments up to...	60 (1524)
WW Part# Reference		06	08	10	12	14	02 increments up to...	60
	Stand Width	15.85 (403)	17.85 (453)	19.85 (504)	21.85 (555)	23.4 (594)	2" (51) increments up to...	69.4 (1762)
	Top of Belt Height	24-28 (610-711)		1” (25) increments up to...				70-74 (1778-1880)
	HH Part# Reference	2428		0101 increments up to...				7074
	Stand Width	17.81 (452)	19.81 (503)	21.81 (554)	23.81 (605)	25.8 (655)	2" (51) increments up to...	71.8 (1823)
	Top of Belt Height	24-28 (610-711)		1” (25) increments up to...				70-74 (1778-1880)
	HH Part# Reference	2428		0101 increments up to...				7074
	Stand Width	10.25 (260)	12.25 (311)	14.25 (362)	16.25 (413)	18.25 (464)	2" (51) increments up to...	64.25 (1632)
	Top of Belt Height	18-22 (457-559)		or				21-25 (553-635)
	HH Part# Reference	1822		or				2125

Note: HH is to Conveyor Top of Belt
*Note: Some caster model support stands are equipped with integrated outriggers. Contact factory for details.

Tall Support Stands

Fixed Foot Model
Conveyor Width	4 (102)	6 (152)	8 (203)	2 (51) increments to...	60 (1524)
WW Part # Reference	04	06	08	02 increments to...	60
Stand Width at Foot*	(0.263) (HH max) + (WW + 6) inches
Top of Belt (Minimum)	71 (1803)	72 (1829)	73 (1854)	1 (25) increments to...	95 (2413)
Top of Belt (Maximum)	75 (1905)	76 (1930)	77 (1956)	1 (25) increments to...	99 (2515)
HHHH Part Number	7175	7276	7377	01 increments to...	9599

All components are stainless steel brushed to #4 finish
Has +/- 2” of adjustment
Fixed Foot self aligns 10° for sloped floors
Horizontal Mount Version for Direct Level Conveyor Mounting
Incline Mount Version for angled conveyor applications
Includes Diagonal Brace for stability
Tall Support Stands require the use of floor anchors

* Width dimension is nominal
dimension for space claim
purposes only. For detail
dimension, contact factory.

Low Height Support Stands

Fixed Foot Model
Top of Belt (Minimum)	7 (178)	9 (229)
Top of Belt (Maximum)	11 (279)	13 (330)
HHHH Part # Reference	0711	0913
Stand Width at Foot*	WW + 10.5 (267mm)

Swivel Locking Caster Model
Conveyor Width	4 (102)	6 (152)	8 (203)	2 (51) increments to...	60 (1524)
WW Part # Reference	04	06	08	02 increments to...	60
Stand Width at Caster*	22 (559)	24 (610)	26 (660)	2 (51) increments to...	78 (1981)
Top of Belt (Minimum)	12 (305)		14 (356)		16 (406)
Top of Belt (Maximum)	16 (406)		18 (457)		20 (508)
HHHH Part Number	1216		1418		1620

All components are stainless steel brushed to #4 finish
Has +/- 2” of adjustment
Fixed Foot self aligns 10° for sloped floors
Caster is swivel locking
Horizontal conveyor mounts only

* Width dimension is nominal
dimension for space claim
purposes only. For detail
dimension, contact factory.

Sanitary Floor Anchor Kits
	Type 1 Sanitary Floor Anchor Kit 3/8” (10 mm) x 1.57” (40 mm) drop in Stainless Steel Anchor is flush with floor upon removal of bolt Two (2) per anchor kit Part No. FAS-1		Type 2 Sanitary Floor Anchor Kit 3/8” (10 mm) x 2 3/4” (70 mm) Stainless Steel Threaded anchor bolt protrudes above floor after installation Two (2) per anchor kit Part No. FAS-2

Sanitary Floor Anchor Kits

Type 1 Sanitary Floor Anchor Kit

3/8” (10 mm) x
1.57” (40 mm) drop in
Stainless Steel
Anchor is flush with floor upon removal of bolt
Two (2) per anchor kit

Part No. FAS-1

Type 2 Sanitary Floor Anchor Kit

3/8” (10 mm) x
2 3/4” (70 mm)
Stainless Steel
Threaded anchor bolt protrudes above floor after installation
Two (2) per anchor kit

Part No. FAS-2

Horizontal Ceiling Supports
	All components are stainless steel brushed to #4 finish Includes a pair of mounting brackets and hardware for support on both sides of conveyor Compatible with 1/2” threaded support rod provided by others Part No. 39HCS

Horizontal Ceiling Supports

All components are stainless steel brushed to #4 finish
Includes a pair of mounting brackets and hardware for support on both sides of conveyor
Compatible with 1/2” threaded support rod provided by others

Part No. 39HCS

Adjustable Angle Ceiling Supports
	All components are stainless steel brushed to #4 finish Includes a pair of mounting brackets and hardware for support on both sides of conveyor Compatible with 1/2” threaded support rod provided by others Mounting block pivots to support incline mounts from 0° to 60° Part No. 39ACS

Adjustable Angle Ceiling Supports

All components are stainless steel brushed to #4 finish
Includes a pair of mounting brackets and hardware for support on both sides of conveyor
Compatible with 1/2” threaded support rod provided by others
Mounting block pivots to support incline mounts from 0° to 60°

Part No. 39ACS

Notes:

Due to the wide variety of conveyor and stand options along with possible configurations, stability of final setup is the responsibility of the end user.

7400 SERIES CONVEYORS: Support Stands