7400 ROLLER SERIES: Solid Acetal Gravity Roller Conveyor

Printer-Friendly Documents

Specifications:

Roller widths: 8”, 12”, 18”, 24”, 30”, & 36”
Conveyor lengths: 36” to 120” in 3” increments
Load capacity: 20 lbs. per roller
Frame is all welded with solid round cross members
All frame components are a #4 finish
Frame features welded standoffs for supports
Roller centers 3” and 6”
2” diameter rollers are solid Acetal
Roller ends are located in a UHMW guide bar
Stands are stainless steel tube with adjustable foot and thread guards
Gravity roller is designed to USDA Red Meat & Poultry standards

Features/Benefits:

Frame is constructed of continuous TIG welded 304 stainless steel for durability in tough applications
1” high side for product containment or low side for maximum flexibility
Solid rollers simply lift out of UHMW guide for quick for access to frame during cleaning
Solid UHMW guides removable without tools for complete access to frame during cleaning
Optional welded end stop available for durability

Stainless Steel Gravity Roller: Solid Acetal

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel.

Solid Acetal Gravity Roller Conveyor

Roller Quantity
	Roller Centers			Degree of Angle
Length	3"	6"	Weight (lbs.)	5	10	15
3'	12	7	5	Partial	Yes	Yes
4'	16	9	10	Partial	Yes	Yes
5'	20	11	15	Yes	Yes	Yes
6'	24	13	20	Yes	Yes	Yes
7'	28	15	30	Yes	Yes	Yes
8'	32	17	40	Yes	Yes	Yes
9'	36	19	50	Yes	Yes	Yes
10'	40	21

* Recommended minimum angle of decline is 5 degrees for products greater than 10 lbs.
* Recommended minimum angle of decline is 10 degrees for products less than 5 lbs.
* Recommended 3 rollers are in contact with the product.

STANDARD SIZES
Conveyor Width Reference	06	02 increments up to...	36
Conveyor Belt Width (W)	6” (152)	2” (51) increments up to...	36” (914)
Conveyor Length Reference	036	001 increments up to...	120
Conveyor Length (L)	36” (914)	1” (25) increments up to...	120” (3,048)

Notes:

Conveyor load capacity depends on conveyor size, incline, accumulated loads and other factors.
Dimensions are represented in inches, feet, and (millimeters).
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.