7400 ULTIMATE SERIES CONVEYORS: Modular Belt

• Conveyor Overview
• Modular Belt
• Motorized Pulley

• Profiles
• Belting
• Gearmotor Mounting Packages
• Gearmotors
• Support Stands

Specifications:

• Load: 20 lbs/square foot of belt (90 kg/m2)
  
• Belt Widths: 6” (152 mm) to 36” (914 mm)
  
• Lengths: 36” (914 mm) to 999” (25,375 mm)
  
• Belt speed: 233 ft/min maximum (71 m/min)
  
• UHMW Wear strip bed plate
  
• Continuous TIG welded 304 stainless steel frame
  
• #4 Polish on all frame surfaces
  
• Bearing material is 400 stainless steel
  
• Bearing lubricant is H1 type FDA lubricant
  
• USDA Approved belting and plastic components
  
• Meets USDA, NSF & AMI design specifications

Features/Benefits:

• Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10’ (3,048 mm) long consist of multiple sections which are bolted together (can be welded together on site).
  
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
  
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
  
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
  
• Open Belt Tracking Flanges and solid UHMW idler pucks create access to pulleys.
  
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
  
• The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
  
• Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
  
• Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5” diameter transfer.
  
• The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
  
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
  
• Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
  
• TIG welded stand offs keep fasteners out of the food zone.

Notes:

• Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
• Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
• Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands.