Home About Dorner Distributors TradeshowsSite Map
Dorner Advantage Newsletter

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

7400 ULTIMATE SERIES CONVEYORS: Support Stands



Support Stand Quantity Charts

7400 Ultimate Straight Conveyors
• See table below for Stand Requirements

Straight Conveyors
Conveyor
Length		 Number
of
Supports
20” (0.5M) - 30” (0.8M)
31” (0.8M) - 132” (3.4M)
133” (3.4M) - 252” (6.4M)
253” (6.4M) - 372” (9.4M)
373” (9.5M) - 492” (12.5M)
493” (12.5M) - 612” (15.5M)
613” (15.6M) - 732” (18.6M)
733” (18.6M) - 852” (21.6M)
853” (21.7M) - 972” (24.7M)
973” (24.7M) - 999” (25.4M)
1
2
3
4
5
6
7
8
9
10


7400 Ultimate Curved Conveyors
• Straight modules must have stands near ends and at frame section junctions
• See table below for Curve Modules Stand Requirements

Curve Modules Stand Requirements
 
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"
15 n/a n/a 0 0 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
45 n/a n/a 0 0 0 0 0 0 0 0 0 0 0 0 0
60 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
75 n/a n/a 1 1 1 1 1 1 1 1 1 1 1 1 1
90 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1
105 n/a n/a 1 1 1 1 1 1 1 2 2 2 2 2 2
120 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2
135 n/a n/a 2 2 2 2 2 2 2 2 2 2 2 2 2
150 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3
165 n/a n/a 3 3 3 3 3 3 3 3 3 3 3 3 3
180 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3


Support Stands


  • Horizontal Mount Version for direct conveyor mounting, conveyor must be level (Mount directly to conveyor).
  • Foot self-aligns 10º for sloped floors.
  • +/- 1 3/8” height adjustment.
  • All components are stainless steel brushed to #4 finish.
  • Metric fasteners.
  • Incline Mount Version for angled conveyor applications.
  • Sanitary Support Stands do not require mounting brackets.

Straight Conveyor Fixed Foot Model
Conveyor Width 6
(152) 		8
(203) 		10
(254) 		12
(305) 		14
(356)		 2" (25) increments
up to... 		36
(914)
WW Part# Reference 06 08 10 12 14 02 increments up to... 36
Stand Width 18.3
(465)		 20.3
(517)		 22.3
(566)		 24.3
(617)		 18.4
(467)		 2" (25) increments
up to...		 40.4
(1026)
Top of Belt Height 22
(559)		 1” (25) increments up to... 72
(1829)
HH Part# Reference 22 0101 increments up to... 72
Stand Width 18.3
(465)		 20.3
(517)		 22.3
(566)		 24.3
(617)		 18.5
(470)		 2" (25) increments
up to... 		40.5
(1029)
Top of Belt Height 22
(559)		 1” (25) increments up to... 72
(1829)
HH Part# Reference 22 0101 increments up to... 72

Straight Conveyor Swivel Locking Casters Model*
Conveyor Width 6
(152) 		8
(203) 		10
(254) 		12
(305) 		14 (356) 2" (25) increments
up to... 		36
(914)
WW Part# Reference 06 08 10 12 14 02 increments up to... 36
Stand Width 18.3
(465)		 20.3
(517)		 22.3
(566)		 24.3
(617)		 18.4
(467)		 2" (25) increments
up to...		 40.4
(1026)
Top of Belt Height 28
(711)		 1” (25) increments up to... 72
(1829)
HH Part# Reference 2428 0101 increments up to... 72
Stand Width 18.3
(465)		 20.3
(517)		 22.3
(566)		 24.3
(617)		 18.5
(470)		 2" (25) increments
up to... 		40.5
(1029)
Top of Belt Height 28
(711)		 1” (25) increments up to... 72
(1829)
HH Part# Reference 28 0101 increments up to... 72
Note: HH is to Conveyor Top of Belt
*Note: Some caster model support stands are equipped with integrated outriggers. Contact factory for details.

Welded Stand Offs Keep Fasteners Out of Food Zone Threadless Stainless Steel Support Stand Feet
 Threadless Stainless Steel Support Stand Casters


Tall Support Stands


Fixed Foot Model
Conveyor Width 4
(102)		 6
(152)		 8
(203)		 2 (51) increments to... 60
(1524)
WW Part # Reference 04 06 08 02 increments to... 60
Stand Width at Foot* (0.263) (HH max) + (WW + 6) inches
Top of Belt (Minimum) 71
(1803)		 72
(1829)		 73
(1854)		 1 (25) increments to... 95
(2413)
Top of Belt (Maximum) 75
(1905)		 76
(1930)		 77
(1956)		 1 (25) increments to... 99
(2515)
HHHH Part Number 7175 7276 7377 01 increments to... 9599





  • All components are stainless steel brushed to #4 finish
  • Has +/- 2” of adjustment
  • Fixed Foot self aligns 10° for sloped floors
  • Horizontal Mount Version for Direct Level Conveyor Mounting
  • Incline Mount Version for angled conveyor applications
  • Includes Diagonal Brace for stability
  • Tall Support Stands require the use of floor anchors


    * Width dimension is nominal
    dimension for space claim
    purposes only. For detail
    dimension, contact factory.

Low Height Support Stands


Fixed Foot Model
Top of Belt (Minimum) 7
(178)		 9
(229)
Top of Belt (Maximum) 11
(279)		 13 (330)
HHHH Part # Reference 0711 0913
Stand Width at Foot* WW + 10.5 (267mm)

Swivel Locking Caster Model
Conveyor Width 4
(102)		 6
(152)		 8
(203)		 2 (51) increments to... 60
(1524)
WW Part # Reference 04 06 08 02 increments to... 60
Stand Width at Caster* 22
(559)		 24
(610)		 26
(660)		 2 (51) increments to... 78
(1981)
Top of Belt (Minimum) 12
(305)		 14
(356)		 16
(406)
Top of Belt (Maximum) 16
(406)		 18
(457)		 20
(508)
HHHH Part Number 1216 1418 1620




  • All components are stainless steel brushed to #4 finish
  • Has +/- 2” of adjustment
  • Fixed Foot self aligns 10° for sloped floors
  • Caster is swivel locking
  • Horizontal conveyor mounts only


    * Width dimension is nominal
    dimension for space claim
    purposes only. For detail
    dimension, contact factory.

Sanitary Floor Anchor Kits


Type 1 Sanitary Floor Anchor Kit

  • 3/8” (10 mm) x
    1.57” (40 mm) drop in
  • Stainless Steel
  • Anchor is flush with floor upon removal of bolt
  • Two (2) per anchor kit
Part No. FAS-1


Type 2 Sanitary Floor Anchor Kit

  • 3/8” (10 mm) x
    2 3/4” (70 mm)
  • Stainless Steel
  • Threaded anchor bolt protrudes above floor after installation
  • Two (2) per anchor kit
Part No. FAS-2

Horizontal Ceiling Supports



  • All components are stainless steel brushed to #4 finish
  • Includes a pair of mounting brackets and hardware for support on both sides of conveyor
  • Compatible with 1/2” threaded support rod provided by others
Part No. 39HCS

Adjustable Angle Ceiling Supports



  • All components are stainless steel brushed to #4 finish
  • Includes a pair of mounting brackets and hardware for support on both sides of conveyor
  • Compatible with 1/2” threaded support rod provided by others
  • Mounting block pivots to support incline mounts from 0° to 60°
Part No. 39ACS

 

Back to top