Home About Dorner Contact Us Distributors TradeshowsSite Map
Dorner Advantage

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

Home > Standard Products > 7600 Series > Support Stands

7600 SERIES CONVEYORS: Support Stands



Support Stand Quantity Charts


Straight Conveyor Support Stands

  • Horizontal Mount Version for direct conveyor mounting, conveyor must be level (Mount directly to conveyor)
  • Foot self-aligns 10° for sloped floors
  • +/- 2” height adjustment
  • All components are stainless steel brushed to #4 finish
  • Incline Mount Version for angled conveyor applications
  • Sanitary Support Stands do not require mounting brackets

SUPPORT STAND QUANTITY CHART

7600 Series Straight Conveyors
Conveyor Length Number of Supports
36” (0.8M) - 132” (3.4M)
133” (3.4M) - 252” (6.4M)
253” (6.4M) - 372” (9.4M)
373” (9.5M) - 480” (12.2M)
2
3
4
5


Straight Conveyor Support Stands




Straight Conveyor Fixed Foot Model
Conveyor Width 6 (152) 8 (203) 10 (254) 12 (305) 14 (356) 2" (51) increments
up to... 		60 (1524)
WW Part# Reference 06 08 10 12 14 02 increments up to... 60
Stand Width 15.85
(403)		 17.85
(453)		 19.85
(504)		 21.85
(555)		 23.4
(594)		 2" (25) increments
up to...		 62.1
(1578)
Top of Belt Height 19-23 (483-584) 1” (25) increments up to... 70-74 (1778-1880)
HH Part# Reference 1923 0101 increments up to... 7074
Stand Width 17.81
(452)		 19.81
(503)		 21.81
(554)		 23.81
(605)		 25.8
(655)		 2" (51) increments
up to... 		71.8
(1823)
Top of Belt Height 19-23 (483-584) 1” (25) increments up to... 70-74 (1778-1880)
HH Part# Reference 1923 0101 increments up to... 7074
Stand Width 10.25
(260)		 12.25
(311)		 14.25
(362)		 16.25
(413)		 18.25
(464)		 2" (51) increments
up to... 		64.25
(1632)
Top of Belt Height 13-17 (330-432) or 16-20 (406-508)
HH Part# Reference 1317 or 1620

Straight Conveyor Swivel Locking Casters Model*
Conveyor Width 6 (152) 8 (203) 10 (254) 12 (305) 14 (356) 2" (51) increments
up to... 		60 (1524)
WW Part# Reference 06 08 10 12 14 02 increments up to... 60
Stand Width 15.85
(403)		 17.85
(453)		 19.85
(504)		 21.85
(555)		 23.4
(594)		 2" (51) increments
up to...		 69.4
(1762)
Top of Belt Height 24-28 (610-711) 1” (25) increments up to... 70-74 (1778-1880)
HH Part# Reference 2428 0101 increments up to... 7074
Stand Width 17.81
(452)		 19.81
(503)		 21.81
(554)		 23.81
(605)		 25.8
(655)		 2" (51) increments
up to... 		71.8
(1823)
Top of Belt Height 24-28 (610-711) 1” (25) increments up to... 70-74 (1778-1880)
HH Part# Reference 2428 0101 increments up to... 7074
Stand Width 10.25
(260)		 12.25
(311)		 14.25
(362)		 16.25
(413)		 18.25
(464)		 2" (51) increments
up to... 		64.25
(1632)
Top of Belt Height 18-22 (457-559) or 21-25 (533-635)
HH Part# Reference 1822 or 2125
Note: HH is to Conveyor Top of Belt
*Note: Some caster model support stands are equipped with integrated outriggers. Contact factory for details.

Quick Release Support Stands

  • Fast belt removal with No Tools Required
  • No more removing stands to change belts
  • Require the use of the two (2 per stand) included Type 1 Sanitary Floor Anchors (see below for details)

    Use stand quantity chart from above

Quick Release Support Stands
Conveyor Width 6
(152) 		8
(203) 		10
(254) 		12
(305) 		14
(356) 		2" (51) increments
up to... 		36
(914)
WW Part# Reference 06 08 10 12 14 02 increments
up to... 		36
Stand Width 12.6
(320)		 14.6
(371)		 16.6
(422)		 18.6
(472)		 18.43
(468)		 2" (51) increments
up to...		 40.43
(1027)
Top of Belt Height 19-23
(483-584)		 1” (25) increments
up to...		 70-74
(1778-1880)
HH Part# Reference 1923 0101 increments up to... 7074

Note: HH is to Conveyor Top of Belt

 

The Quick Release Stands require the use of Floor Anchors (see below)

Tall Support Stands


Fixed Foot Model
Conveyor Width 4
(102)		 6
(152)		 8
(203)		 2 (51) increments to... 60
(1524)
WW Part # Reference 04 06 08 02 increments to... 60
Stand Width at Foot* (0.263) (HH max) + (WW + 6) inches
Top of Belt (Minimum) 71
(1803)		 72
(1829)		 73
(1854)		 1 (25) increments to... 95
(2413)
Top of Belt (Maximum) 75
(1905)		 76
(1930)		 77
(1956)		 1 (25) increments to... 99
(2515)
HHHH Part Number 7175 7276 7377 01 increments to... 9599





  • All components are stainless steel brushed to #4 finish
  • Has +/- 2” of adjustment
  • Fixed Foot self aligns 10° for sloped floors
  • Horizontal Mount Version for Direct Level Conveyor Mounting
  • Incline Mount Version for angled conveyor applications
  • Includes Diagonal Brace for stability
  • Tall Support Stands require the use of floor anchors


    * Width dimension is nominal
    dimension for space claim
    purposes only. For detail
    dimension, contact factory.

Low Height Support Stands


Fixed Foot Model
Top of Belt (Minimum) 7
(178)		 9
(229)
Top of Belt (Maximum) 11
(279)		 13 (330)
HHHH Part # Reference 0711 0913
Stand Width at Foot* WW + 10.5 (267mm)

Swivel Locking Caster Model
Conveyor Width 4
(102)		 6
(152)		 8
(203)		 2 (51) increments to... 60
(1524)
WW Part # Reference 04 06 08 02 increments to... 60
Stand Width at Caster* 22
(559)		 24
(610)		 26
(660)		 2 (51) increments to... 78
(1981)
Top of Belt (Minimum) 12
(305)		 14
(356)		 16
(406)
Top of Belt (Maximum) 16
(406)		 18
(457)		 20
(508)
HHHH Part Number 1216 1418 1620




  • All components are stainless steel brushed to #4 finish
  • Has +/- 2” of adjustment
  • Fixed Foot self aligns 10° for sloped floors
  • Caster is swivel locking
  • Horizontal conveyor mounts only


    * Width dimension is nominal
    dimension for space claim
    purposes only. For detail
    dimension, contact factory.

Sanitary Floor Anchor Kits


Type 1 Sanitary Floor Anchor Kit

  • 3/8” (10 mm) x 1.57” (40 mm) drop in
  • Stainless Steel
  • Anchor is flush with floor upon removal of bolt
  • Two (2) per anchor kit
Part No. FAS-1


Type 2 Sanitary Floor Anchor Kit

  • 3/8” (10 mm) x 2 3/4” (70 mm)
  • Stainless Steel
  • Threaded anchor bolt protrudes above floor after installation
  • Two (2) per anchor kit
Part No. FAS-2

Horizontal Ceiling Supports



  • All components are stainless steel brushed to #4 finish
  • Includes a pair of mounting brackets and hardware for support on both sides of conveyor
  • Compatible with 1/2” threaded support rod provided by others
Part No. 39HCS

Adjustable Angle Ceiling Supports



  • All components are stainless steel brushed to #4 finish
  • Includes a pair of mounting brackets and hardware for support on both sides of conveyor
  • Compatible with 1/2” threaded support rod provided by others
  • Mounting block pivots to support incline mounts from 0° to 60°
Part No. 39ACS

Notes:

  • Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.

 

Back to top