Home About Dorner Contact Us Distributors TradeshowsSite Map
Dorner Advantage

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

Home > Standard Products > 7600 ULTIMATE Series > Positive Driven Flat Belt

7600 ULTIMATE SERIES CONVEYORS: Positive Driven Flat Belt



Specifications:

  • Load: 20 lbs/square foot of belt (90 kg/m2)
  • Belt Widths: 6” (152 mm) to 36” (914 mm)
  • Lengths: 36” (914 mm) to 40’ (12.2 m)
  • Belt speed: 233 ft/min maximum (71 m/min)
  • Solid urethane belting, includes Belt Scraper
  • UHMW Wear strip bed plate
  • Continuous TIG welded 304 stainless steel frame
  • #4 Polish on all frame surfaces
  • Bearing material is 400 stainless steel
  • Bearing lubricant is H1 type FDA lubricant
  • USDA Accepted Belting
  • Meets USDA, NSF & AMI design specifications

Features/Benefits:

  • Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10’ (3,048 mm) long consist of multiple sections which are bolted together (can be welded together on site).
  • Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
  • Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
  • The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
  • Solid Urethane belt is sprocket driven for consistent performance and has no bacteria harboring hinges or pins.
  • Open Belt Tracking Flanges and solid UHMW idler pucks create access to pulleys.
  • Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
  • Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
  • Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
  • Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
  • TIG welded stand offs keep fasteners out of the food zone.

Positive Drive



Belt Scraper Optional: Motorized Pulley

UHMW blade removes
build-up & is easily adjusted

For fast and
effective sanitation
Sanitary Options


Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel.



Configurations Available





STANDARD SIZES
Conveyor Width Reference 06 02 increments up to... 36
Conveyor Belt Width (W) 6” (152) 2” (51) increments up to... 36” (914)
Conveyor Length Reference 036 001 increments up to... 480
Conveyor Length (L) 36” (914) 1” (25) increments up to... 480” (12,192)


Notes:

  • Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
  • Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
  • Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands.

 

Back to top