Home About Dorner Distributors TradeshowsSite Map
Dorner Advantage Newsletter

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

Home > Standard Products > LPZ Series > Flat Belt End Drive

LPZ SERIES CONVEYORS: Flat Belt End Drive



Specifications:

  • Belt widths: 3.75" (95) to 48" (1,219)
  • Conveyor lengths: 4' (1,219) to 40' (12,192)
  • 1.62" (41) of belt take-up on conveyors up to 20" long
  • 3.24" (82) of belt take-up on conveyors over 20" long
  • Loads up to 400 lbs.* (181)
  • Adjustable angle, 0°-35°
  • Belt speeds to 421 ft/min (128 M/min)
  • 3" (76) diameter drive pulley turns approximately 9.7" (246) of belt per revolution
  • Metric fasteners

Features/Benefits:

  • Nose-over and walk-thru configurations
  • Quick 5 minute belt change
  • Adjustable angle frames conform to applications
  • Rack and pinion belt tensioning for fast, accurate single point belt tensioning
  • Steel nitrite coated head plates eliminate painted surfaces
  • V-groove bed plate with guided belt provides positive belt tracking, even under demanding side load applications
  • Strong, box-like construction resists damaging frame twist
  • Stand mounting brackets and return belt rollers are easily re-positioned along the frame
  • Special length conveyors to .12" (3) increments at standard price and delivery
  • Special width conveyors to 2" (51) increments at standard price and delivery
  • Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors

 

Optional Interface Tail Section

  • Sealed bearing
  • 1" (25) diameter rollers
  • Widths up to 48" (1219)
  • Available at non-driven end
    to assist in small part transfers


STANDARD SIZES
Conveyor Width Reference 04 06 02 increments up to... 48
Conveyor Belt Width (W) 3.75"
(95)		 6"
(152)		 2" (51) increments up to... 48"
(1,219)
*Section Length Reference 0200 0001 increments up to... 3800
Conveyor Length (L) 2' (610) .12" (3) increments up to... 38' (11,582)
L1 + L2 + L3 = Maximum 40' (12,192) long conveyor


Part Reference Guide (2.90 MB PDF)

Notes:

  • Note: Conveyors wider than 40" (1,016) require V-Guide belt tracking
  • Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
  • Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
  • Dimensions are represented in inches, feet, and (millimeters).
  • Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
  • Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.

 

Back to top