7200 Series Conveyors Belt Options

 Belt Splicing

Finger Splice

All belts are available with a standard Thermoformed finger splice. This splice makes the belt continuous and is virtually undetectable. Splice bonding methods vary by belt type. Consult factory for details. 
 

Plastic Clipper*

An optional plastic clipper splice is available for quick removal of belts or when conveyors are installed in tight spaces. 
 

Metal Clipper*

An optional metal clipper splice is also available for quick removal of belts or when conveyors are installed in tight spaces.
 

 

 * See belt charts for compatibility. Not for use with 2200/2300 Series Nose Bar Transfer or 2200/2300 Series with bottom wiper option.
Plastic and Metal Clippers are slightly thicker than base belt. Contact factory for details.

 7200 Application Specific Belts

Type 54

 

 

 

 

  • FDA Sealed Edge
  • Urethane
  • Low friction

Type 55

 

 

 

 

  • FDA Sealed Edge
  • Urethane
  • High friction

Type 56

 

 

 

 

  • Cut Resistant
  • Urethane
  • Dimpled texture

Type 57

 

 

 

 

  • Cut Resistant
  • Nitrile
  • "Fuzzy" texture

Type 59

 

 

 

 

  • Color Contrasting
  • PVC
  • Matte black

Type 60

 

 

 

 

  • Color Contrasting
  • Urethane
  • Matte green

Type 61

 

 

 

 

  • Color Contrasting
  • Urethane
  • Matte blue

Type 63

 

 

 

 

  • Electrically Conductive
  • Urethane

Type 64

 

 

 

 

  • High Friction
  • PVC
  • Grip texture

Type 65

Belt Type 65 

 

 

 

  • Chemical Resistant
  • Polypropylene
  • Low friction

Type 66

 

 

 

 

  • Chemical Resistant
  • Polyester
  • Medium friction

Type 67

 

 

 

 

  • Type F Low Friction Cleated
  • Polyester

 

Type 68

Type 68 

 

 

 

  • FDA Encased
  • Urethane
  • Low friction

Type 69

Type 69 

 

 

 

  • FDA Encased
  • Urethane
  • High friction
 
 7200 Series Fast Delivery Belts

PDF: Fast Ship Belt Specifications Chart

Type 01

 

 

 


  • FDA Accumulation
  • Urethane/Polyester

Type 02

 

 

 


  • FDA General Purpose
  • Urethane/Polyester 

Type 03

 

  • FDA High Friction
  • Urethane/Polyester
  • Anti-static

Type 05

  • Accumulation
  • Urethane/Polyester

Type 06

  • Electrically Conductive
  • Urethane/Polyester

Type 08

 

 

 

 

  • High Friction
  • PVC/Polyester
 7200 Series Cleats

Cleat Types

Click on a cleat for full specifications.

  Cleat Types

 

 

 

* Maximum 20” (508) cleat spacing for 18” and wider conveyors with lengths greater than 7’ (2134)
** 18” and wider conveyors have a maximum length of 7’ (2134)

Base Belt Material: .055 (1.4) thick, high friction FDA approved urethane, 176˚F (80˚C) maximum part temperature.
See Specialty Belt 67 for low friction base belt material.
Note: Minimum cleat spacing is approximately 2” (51). Consult Factory.

 
Cleat Spacing

Refer to Formulas below.
Use formula 1 to determine the approximate number of cleats required based upon the desired cleat spacing. Since a partial cleat cannot be used, round the number of cleats up or down.
Use formula 2 to get the cleat space reference for the conveyor part number.