Curved Modular Belt


Features & Benefits of 7350 AquaGard Straight Modular Flat Belt Conveyor:

  • Innovative curve chain with center bearing to eliminate friction, allowing 4 curves on a single motor
  • Safest curve chain in the industry with chain openings less than 4 mm, even in the curves
  • Flat sides allow for flexibility when mounting accessories, interfacing with other equipment or transferring products
  • Compact curve footprint with infeed and outfeed sections as short as 457 mm (18 in)
  • Minimal horizontal surfaces for easy to clean sanitary surfaces
  • Micropitch powered transfer for end transfer of product as small as 75 mm (3 in) long
  • Side & bottom mount motor package for application flexibility
  • Robust open leg support stands with 7 gauge welded stainless steel
  • Optional Powered Transfer for small parts and maintaining speed through transfer

Specifications

  • Loads up to 227 kg (500 lbs) or 98 kg/sq m (20 lbs/sq ft)*
  • Belt speeds up to 78.6 m/min (260 ft/min)
  • Belt widths: 152 mm (6 in) to 610 mm (24 in)
  • Conveyor section lengths: 460 mm (18 in) to 15240 mm (600 in)
  • Curve angles of 45, 90, 135 and 180 degrees
  • Bolt-together Stainless Steel Frame
  • Mold to width chain up to 457 mm (18 in) wide

    

  • No chain opening exceeding 4 mm (0.15 in)
  • FDA approved belting and plastic components
  • Chain supported with stainless steel center bearing,increasing load capacity and the ability to have up to 4 curves on a single motor
  • Optional powered transfer for smooth transfer of parts as short as 75 mm (3 in) in diameter
  • Suitable for use in wet environments
  • Stainless Steel construction for wipe down and low pressure washdown with non-caustic solutions

Accessories

Guides
Transfers
Mounting & Hardware
Photo Eye Kits
Drip Pans
Infeed Chute
Angled Hopper

Manuals & Literature

Engineering ManualsPagesFile Size
AquaGard 7350 Series Manual768.76 MB

 

LiteraturePagesFile Size
AquaGard Conveyors Brochure42 MB
Sanitary Conveyors Line Card65.97 MB