LPZ (Z-Frame) Cleated Belt

Specifications of AquaGard 7350 LPZ (Z-Frame) Cleated Belt Conveyor:

• Optional sidewall cleated belts for small parts
• Configurations: Noseover, Horizontal to incline, Z-frame
• Standard tip-up tail
• Loads up to 45 kg (100 lbs) or 98 kg/sq m (20 lbs/sq ft)*
• Belt speeds up to 91 m/min (300 ft/min)
• Belt widths: 152 mm (6 in) to 610 mm (24 in)
• Conveyor section lengths: 610 mm (24 in) to 6100 mm (240 in)
• Maximum total conveyor length of 12190 mm (480 in)
• Angles from 30 degrees to 60 degrees in 5 degree increments
• Cleat heights from 11 mm (0.43 in) to 60 mm (2.63 in)
• Bolt-together 304 Stainless Steel Frame
• Hard chrome coated bearing with FDA H1 food grade grease
• FDA approved belting and plastic components
• Cleated belt options include sealed edge, encased and sidewall cleating
• Open design with minimal horizontal surfaces
• Suitable for use in wet environments
• Stainless Steel construction for wipe down and low pressure washdown with non-caustic solutions