Features & Benefits

• Frame is designed with no horizontal surfaces for optimum cleaning.
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
• Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt
• Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5” diameter transfer.
• The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
• Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.

Specifications

• Loads up to 20 lbs/square foot of belt (90 kg/m2)
• Belt Widths: 8” (203 mm) to 36” (610 mm)
• Total Lengths up to 999” (25,375 mm)
• Belt speed: 175 ft/min maximum (53 m/min)
• Degree of curves: 15° to 180°
• Maximum of 2 curves per conveyor with up to 240° total degrees
• Wear strip material is UHMW
• Continuous TIG welded 304 stainless steel frame
• #4 Polish on all outside surfaces
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• FDA approved belting and plastic components